Pellenc
Optimum Harvester & Multifunction Tractor
- 99.8%
- Clean harvest
- 3 min
- Tool change
- 95°
- Turning angle
Pellenc's harvesting system uses oval picking rods driven at both ends, with a condensing zone where the vegetation enters, an adjustable active zone that suits any vineyard, variety or trellis, and a widening exit that releases the vines gently. It's the only principle that keeps a constant distance between the left and right rods, for damage-free shaking.
Pellenc has built its range on constant innovation since 1973. Our own custom-harvest fleet runs Pellenc harvesters with Selectiv' Process heads. We service them, rebuild them, and stock certified Pellenc parts for them.
Vineyard
Models we sell
- Self-propelled 890 Optimum
- 8590 multifunction tractor
- Smart (hydraulic shaking) and Selectiv' Process heads
1 / 5Features
Multifunction
- Works several rows in a single pass
- EASY CONNECT hydraulic mono-coupling
- Change tools in 3 minutes
- EASY POWER matches output to the tool
Easy Tech steering
- Spacious ROPS 4 cab
- EASY TOUCH controls for every tool from one screen
- 95° EASY TURN turning angle
- EASY SMART harvest settings
Eco-performance
- Up to 43% less fuel per hectare
- Most compact carrier on the market
- Perkins Tier IV engine
- Lower maintenance time and cost
Harvesting
- ACTIV' head protects the foliage
- Gentle EASY SMART shaking
- Flexible sorter conveyor sorts as you pick
- Up to 25% more productivity
Safety & visibility
- 5 emergency stops, plus an easy-reach battery switch
- Automatic parking brake
- 12 lights and 2 colour night-vision cameras
- Auto tilt correction, row centering and ground detection
“99.82% clean harvest. Your harvest goes straight into the tank.”
Selectiv' Process 2 harvesting head
Sorts on board at the same working speed as a standard head, without losing juice. Notched rollers turn the stalks outward; sieve rollers free the grapes into the bins and drop the waste in the row. You can check the result from the driver's seat, day or night.
Independent tests by the French vine and wine institute (IFV) measured just 0.18% waste — 669 g in a 382 kg harvest.
- Linear grape separator and sorting table come apart easily
- Simple mechanical system, noticeably quieter than comparable heads
- Optional bin-level display in the cab
- Cleans in less than an hour
Reception, conveying and cleaning
Two adjustable catcher-plate ramps form a watertight base, with overlapping plates on elastic hinges that slide smoothly past the trunks. Endless cleated belts carry the crop, and an open-structure design ejects foreign bodies, with an alarm if anything blocks.
Two fans with interchangeable-blade cane grinders clean the grapes as they land, with speed set from the cab. Augers spread the load evenly in the bins, and a grid-type sorter separates juice, grapes and whole bunches while rear suction fans pull out leaves.
- Everything that touches the harvest is stainless steel or food-grade
- Conveyors reverse and synchronize with ground speed and crop size
- Hydraulics are covered to protect the harvest from leaks
Specs
Configurations vary — ask us for the full spec sheet for your setup.
- Clean harvest
- 99.8%
- Tool change
- 3 min
- Turning angle
- 95°
- Fuel savings
- Up to 43% per hectare
- Engine
- Perkins Tier IV
- Cab
- ROPS 4 roll-over protection
- Selectiv' head weight
- +300 kg over a standard head
- Head cleaning
- Under 1 hour
See it run.
More on YouTubeShow 2 more videosShow fewer
Downloads
Manuals, brochures and spec sheets. Need one that isn't here? Ask and we'll send it.
Let's spec yours.
Tell us about your operation and what you need the machine to do, and we'll come back with options and pricing.
Financing options available
