The EDWARDS FRONT MOUNT 3-POINT HITCH enables you to mount many of the 3-point implements to the front of your tractor.  Front mounting offers several advantages including the use of front and rear implements at the same time.  This will reduce the number of passes over the same ground, saving fuel and tractor man hours. 

The EDWARDS BRUSH SPIDER is designed for sweeping pruning's, leaves and debris from the tree row.  The unit combines with weed sprayers, shredders and tillage tools for efficient single pass clean up operation.  The brush spider can be mounted to the corner of an offset mower, bucket loader or the three point of the tractor.  This berm sweeper for orchard, vineyards, berries, and nurseries.

The EDWARDS BRUSH SPIDER enables you to clean around posts and between vines in vineyards without extra trips or hand raking.  The Brush Spider sweeps prunings, leaves and other debris away from rows and into the path of your mower, shredder or tiller.  The durable polyurethane sweeping finger provide long life with action that is gentle on vines and posts.  The Edwards Brush Spider will sweep the berms clean of prunings, leaves and debris.

The EDWARDS BRUSH RAKE is made to push brush and debris from the field and features a floating design that allows the heavy duty teeth to follow the contour of the ground without digging in.  It can be mounted to a loader, forklift or the three point hitch. 

The EDWARDS SPRAY BOOM enables you to spray both sides of the row at one time in your orchard.  The hydraulically adjustable Spray Boom can be adjusted to compensate for slight changes in row spacing.  Individual hydraulic cylinders enable each boom to be angled to conform to ground contours or raised to a transport position.  

The EDWARDS MULTI PURPOSE DISC can easily be converted to many different widths and configurations.  Each disc is individually mounted on heavy duty ball bearings.  The disc is engineered so that the disc does a maximum amount of cutting with a minimum amount of weight. 

The EDWARDS BIN DUMPER is a hydraulically actuated clamp and rotation carriage.  A time saving convenience is the hydraulic hold down clamp that retracts to a backstop position for handling stacked bins.  The automatic safety lock prevents rotation when the clamp is in the backstop position.  The Bin Rotator will fit on Edwards fork lifts or onto an ITA carriage.

The EDWARDS REVERSE STEERING kit is easily installed with no modification of tractor required.  This attachment has been designed completely with the operator in mind.  Proper steering orientation allows anyone with driving ability to operate this unit.

The EDWARDS 3-POINT TRANS-PORTER fastens to the three point lift of most tractors.  The    trans-porter    is a low cost carrying device designed to lift and carry bulk bins, feed, baled hay almost anything including other implements.  Available for either category 1 or 2.  Choose from 7 different models from 1500 to 3500 pound capacities.  Ask your dealer for additional information.

The EDWARDS LOADER FORKS converts a bucket loader to an efficient front end fork lift.  A unit is available for most popular loader models.   6 different models to choose from 800 to 3500 pound capacities, fixed or adjustable forks.  Edwards has the loader fork for your application.  Side shift is available on the 2500 and 3500 pound models. 

The EDWARDS FRONT 3-POINT HITCH combined with the Edwards 3-Point Trans-Porter.  Install a Trans-Porter to the rear and double the bin movement.  Remove the Edwards forks from the front and let the Front 3-Point Hitch attach to many of you category 1 implements.  Just imagine the time saving possibilities of a Front 3-Point Hitch.

The EDWARDS MINI LIFT is designed to work on the smaller tractors.  It has a 1200 pound lift capacity and lifting heights from 60, 72, 84 and 96 inches.  The mini lift can be mounted to the three point arms or to the rear axle of the tractor. 

The EDWARDS UNIVERSAL LIFT series TT4800 are designed for easy on, easy off convenience. The UNIVERSAL LIFT can be used for lifting, moving and loading palletized material, bins and other bulky or heavy objects.  The series TT4800 has a lifting height of 40 inches, add that to the 24 inches of the 3-point arms of the tractor for a maximum lifting height of 64 inches with a rated capacity of 2,000 pounds at 24 inch load center. Optional attachments include side shift and hold down.

The EDWARDS UNIVERSAL LIFT series TT4900 are designed for easy on, easy off convenience. The UNIVERSAL LIFT can be used for lifting, moving and loading palletized material, bins and other bulky or heavy objects.  The TT4900 has a lifting height of 72 inches, add that to the 24 inches of the 3-point arms of the tractor for a maximum lifting height of 96 inches with a rated capacity of 2,000 pounds at 24 inch load center.  Optional attachments include side shift and hold down clamps

The EDWARDS UNIVERSAL LIFTS are designed for easy on, easy off convenience. The UNIVERSAL LIFT can be used for lifting, moving and loading palletized material, bins and other bulky or heavy objects.  The TT5100 comes in 4 lifting heights 60, 72, 84 and 96 inches this does not include the 3-point arms of the tractor.  The TT5100 has a 4,000 pound capacity rating, with optional side shift. 

The EDWARDS TRANS-TIER is easily mounted on your tractor for seasonal use. It is an all around utility lift with a capacity of 2000 pounds at a 24 inch load center. It can be mounted either on the front or rear of your tractor. Lifting heights from 5 to 9 feet in 1 foot increments. An optional side shift is available.  
 

SKID STEER LOADER MASTS for many different brands. The EDWARDS TRANSTIER is used to handle beehives, bins, transport produce, and load trucks. A rugged mounting bracket arrangement attached the TRANS-TIER quickly and easily to the loader frame.  We have mountings for Bobcats, Case Uniloaders, Swingers, Cat and others. 

 The EDWARDS TRANS-FORK series TF6800 will fit most agricultural and industrial tractors. Available for front and rear mountings with lifting heights available from 5 to 12 feet by 1 foot increments. A 2500 pound lift capacity makes this unit durable enough for permanent installation. An optional side shift is available.

The EDWARDS TRANS-FORK series TF7900 rear mounted forklift is a heavy duty industrial type roller mast. It has a 4000 pound lifting capacity, and 5 to 12 foot lifting height, in 1 foot increments. Add an EDWARDS REVERSE STEERING and OVERHEAD GUARD to complete the package.

The EDWARDS DYNA SCAT is designed for use in all kinds of agricultural and construction applications. Three wheel drive makes the DYNA SCAT move and steer like a forklift should, smooth and fast. Power to the steering wheel allows for a shorter turning radius and gives the DYNA SCAT its phenomenal maneuverability. The DYNA SCAT is easy to operate and has a 12 inch ground clearance.

The EDWARDS HIGHWAY MOWER is designed to adapt to a wide variety of agricultural and industrial tractors.  Mounting permits complete flexibility for shoulder and median mowing.  The direct coupled hydraulic drive provides shock absorbing power transmission with overload protection.  

The EDWARDS FLAIL MOWER is the perfect companion for the Edwards highway Mower.  Available in 5, 6, 7, and 8 foot cutting width in either center or offset position.  Power band  drive gives maximum drive and absorbs shocks.  Industrial double edged knives individually mounted for easy replacement or sharpening. 

 The Edwards DYNA-CUTTER does it all.  High speed dual blade cutting power.  High capacity, shock absorbing power band drive and heavy duty construction to handle rugged mowing jobs.  Low profile design with center drive or offset drive for orchard operation.  Gets in under trees without damage to limbs or fruit.  Exclusive DYNA-TRIM attachment (optional) mows around and between trees for "one pass" orchard mowing. 

The EDWARDS DYNA TRIM SERIES DT5420 is a hydraulic driven, mid mounted, low profile mower designed for trimming around trees, posts, sprinkler risers, or other obstacles.  The mid mount position permits combining the Dyna Trim with any three point mounted or  trailing mower.  Hydraulic cylinder controls angle of cut from 15 degrees down to 15 degrees up for hillside terraces. 

The EDWARDS DYNA TRIM attachment you can mow in one direction and reach between the trees to get all the grass and weeds in one operation.  The Dyna Trim also works well for the control of weeds in vineyards, berries, and trellised orchards.  The Dyna Trim mounts to a variety of mower frames, tool bars and three point hitches.

 The EDWARDS DYNA TRIM can be mounted to an EDWARDS FRONT 3-POINT HITCH making this unit able to trim the tree or fence row with excellent visibility and maneuverability.  Having the DYNA TRIM mounted up front allows a rear pto driven mower to be pulled at the same time thus mowing the tree row and the middle strip at the same time.  This is spring loaded to pivot around the trees or fence posts. 

This is the same models as above only double sided mowing both sides of the row.  This DYNA TRIM is also hydraulically driven and mounted to an EDWARDS FRONT 3-POINT HITCH.  This also has a hydraulic width adjustment that with a one spool valve will move both mowing heads in or out to match the row width. 

It is no longer necessary to mow both ways in your orchard,  With the Edwards DYNA-TRIM attachment, you can mow in one direction and reach between the trees to get all the grass and weeds in one operation.  With the DYNA-TRIM you don't have to mow across ditches,  It even reduces pipe handling where sprinklers are used.  This not only saves up to 50% mowing time, but also reduces wear and tear on your machinery.